Be the first to review this product
Extremely easy to use
One universal transmitter- automatically switches to work with either energized or non-energized systems
Receiver not position sensitive- does not need to be rotated in order to provide accurate readings
Traces live wires buried or hidden behind walls
Traces energized and non-energized (open, broken) wires
Performs tests without having to interrupt power
Locates breakers, neutrals, and ground lines
Locates and traces wires in walls, floors, conduit, computer cables, etc.
Pinpoints shorts, ground faults and broken wires
Does not interfere with sensitive electronic equipment
Precise sensitivity adjustment
Battery Booster strengthens signal for open tracing
Clamp-on attachment injects signal for non-contact operation
R-4000CON Receiver
It has two built in detectors that are tuned to pick up the 32.768Khz signals generated by the T-4000 transmitter. The R-4000CON is designed to display the signal strength to enable quick locating of the conductor carrying the signal.
T-4000 Transmitter
When connected to an energized circuit, the T-4000 will filter the low frequencies up to 400Hz and rapidly indicate on the display that the wire is energized. When the user starts the transmission, a combination of signals is injected on top of the 50, 60, or 400Hz that cause a slight, periodic current fluctuation and allows the power line to emit its own, traceable signal. This signal can be detected back to the main generator. However, the signal will not interfere with any sensitive electronic equipment and does not require power interruption. The unit is intrinsically safe and has a ‘LOW’ signal transmission setting that must be used when tracing GFCI-protected circuits.
| Product Includes |
Transmitter, Receiver, Pigtail Cordset, Alligator Clip Cordset, A2200 clamp-on, battery booster w/ charger and Carrying Case |
| Specifications |
System Specifications
Transmitter Operating Voltage: 9-600 VAC
Operating Frequency: 32.786 kHz
Receiver Range Short Mode (in air): 20’ in air from the traced wire under test conditions
Receiver Range Open Mode (in air): 12’ in air from the traced wire under test conditions
Operating Temperature: -18°C to 49°C (0 to 120°F)
Storage temperature: -40° to 66°C (-40° to 150°F)
Case Material: ABS
Case Size: 14x6.7mm) 0.55” x 0.26”)
Weight (AT-4005 CON): 8.20 lbs.
R-4000 CON Receiver
Detectors: Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up
for open mode.
Sensitivity: Low, Mid, High gain with precise sensitivity adjustment (thumbwheel).
Short Mode performance: Over 20’ in air from the traced wire under test conditions.
Open Mode performance: Over 12’ from the traced wire in air under test conditions.
50HZ, 60HZ, and 400HZ Rejection: 120db
Power Source: 9V alkaline battery
Display: 10 LEDs
Case: Flame retardant ABS
Weight: 0.5 Lb. (113g)
T-4000 Transmitter
Operating voltage: 9-600 volts
Operating frequency: 32.768 KHZ
Duty Cycle: Transmit 2 pulses with a duration of 0.0625S each, every 0.5 seconds
Case: Flame retardant ABS
Display: LCD (Liquid Crystal Display)
Weight: 0.32 LB (143.5g)
Current Output of the Signal: Low Mode: 11 mA average, 30 mA peak
Medium Mode: 12 mA average, 36 mA peak
High Mode: 13 mA average, 63 mA peak
Fuse: Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM
Signal Output (9V supply): High setting: 0.74 VAC
Medium setting: 0.61 VAC
Low setting: 0.53 VAC
Battery: 9V alkaline- 24V jack will accept battery pack accessory (B2024 or B2025)
A2202 Clamp-on Transmitter Accessory
Operating Frequency: 32.768KHZ as supplied by T-4000
Case Breakdown Voltage: 3000 volts
Maximum Wire size: 2000 MCM or 2” dia. Cable
Battery: None, power is supplied by T-4000 B2024 Battery Pack
T-4000 B2024 Battery Pack
Type: Nickel-Cadmium rechargeable (20 AA cells)
Capacity: 24-Volt, 600 mah
Rechargeable Time: 14 hours
Fuse: internal self-resetting
B2025 Recharger/Converter
Input: 115VAC
Output: 24 VDC @350 mah |
| Shipping Weight |
7.8000 |
| Power Supply |
Two 9V Batteries |
| Manufacturer |
Amprobe |
| Manufacturer Model Number |
2734261 |
| Manufacturer Warranty |
1 Year |
| upc code |
0 95969 36924 4 |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
Loading...